Read more
RFC range of water/oil coolers
RFC 02-07-12-20 Water coolers
RFC 08-14-19 Water coolers
RFC 30 Water coolers
RFC (coolers)
Active water coolers (chillers) for “small to medium power”
Key features:
- Small and medium power coolers (200 to 3000 W)
- Modular range with rapid availability
- Compatible with water, glycol water, oil, emulsions...
- Wide range of options and finishes
- Available in HFO refrigerant gas version (low GWP)
- DP (tankless) or D (tankless, pumpless) variants
In standard
- Hermetic piston compressor
- Electronic thermostat with digital display
- Air or water condenser
- Capillary tube expansion valve
- Polyethylene tank (steel for oil versions)
- Submerged evaporator
- Circulation pump
- Main switchWater level indicator
- Drain valve
- Textured RAL 7032 paint (7035 on RFC 08-14-19)
- Lifting ring (on RFC 08-14-19)
- High/low temperature alarm (on RFC 08-14-19)
- General fault alarm with dry contact (on RFC 08-14-19)
- Complete documentation
- 18-month warranty (unless otherwise agreed)
Options and adaptations
- EXTT version (outdoor installation)
- HFO low GWP refrigerant gas version (on RFC 12 and RFC 20)
- DP (tankless) or D (tankless, pumpless) variant
- Special pump (centrifugal, etc.)
- Flow controller (with or without indicator)
- Electric water level indicator
- Differential control
- PID control
- Water filter
- Air filter
- Water condenser
- Stainless steel casing
- Industrial connectors (Harting type)
- RAL paint color other than standard
▶ TO BE SPECIFIED IN YOUR REQUEST
RFC 20 oil coolers manufacturing
Stainless steel RFC 20 water cooler
Series of RFC 20 chillers
Special paint on RFC 30 water cooler
Technical specifications
| RFC 02 | RFC 07 | RFC 12 | RFC 12 T | RFC 20 | RFC 20 T | RFC 30 | ||
| Oil version available? | – | – | – | YES | – | YES | – | |
| EXTT* version available? | YES | YES | YES | YES | YES | YES | YES | |
| HFO** refrigerant available? | – | – | YES | – | YES | – | – | |
| Power supply | Type | Single-phase | Single-phase | Single-phase | Three-phase | Single-phase | Three-phase | Single-phase |
| V-Hz | 230-1-50 | 230-1-50 | 230-1-50 | 400-3-50 | 230-1-50 | 400-3-50 | 230-1-50 | |
| Cooling power (+10°C water outlet, +32°C ambient) |
W |
200 | 700 | 1200 | 1200 | 2200 | 2200 | 3000 |
| Power consumption | W | 290 | 560 | 1150 | 1250 | 1400 | 1500 | 1500 |
| Refrigerant | Type | R134a | R134a | R134a or R1234yf |
R134a | R134a or R1234yf |
R134a | R134a |
| Input current nominal / maxi |
A | 2.3 / 8.8 | 3.7 / 15 | 7.3 / 26 | 3.2 / 10 | 7 / 31 | 3.7 / 13 | 6.2 / 22 |
| Line protection | A | nc | nc | nc | nc | nc | nc | nc |
| Electrical connection | mm² | nc | nc | nc | nc | nc | nc | nc |
| Waterproof index | IP | nc | nc | nc | nc | nc | nc | nc |
| Nominal air flow | m3/h | 255 | 390 | 900 | 900 | 1100 | 1100 | 1100 |
| Available water flow mini / maxi |
l/mn | 1 / 9 | 1 / 9 | 3 / 41 | 3 / 41 | 3 / 41 | 3 / 41 | 3 / 41 |
| Available water pressure mini / maxi |
bar | 0.5 / 3.5 | 0.5 / 3.5 | 1 / 2.6 | 1 / 2.6 | 1 / 2.6 | 1 / 2.6 | 1 / 2.6 |
| Hydraulic connection | Type | nc | nc | nc | nc | nc | nc | nc |
| Tank capacity | l | 5 | 8 | 8 | 8 | 30 | 30 | 30 |
| Operating temperature ambient mini / maxi |
°C | +10 / +40*** | +10 / +40*** | +10 / +40*** | +10 / +40*** | +10 / +40*** | +10 / +40*** | +10 / +40*** |
| Regulation temperature range mini / maxi |
°C | +5 / +20**** | +5 / +20**** | +5 / +20**** | +5 / +20**** | +5 / +20**** | +5 / +20**** | +5 / +20**** |
| Noise level | dB(A) | < 69 | < 69 | < 69 | < 69 | < 69 | < 69 | < 69 |
| Dimensions |
H (mm) | 260 | 310 | 360 | 360 | 450 | 450 | 950 |
| L (mm) | 410 | 460 | 550 | 550 | 660 | 660 | 515 | |
| P (mm) | 410 | 620 | 660 | 660 | 760 | 760 | 590 | |
| Weights | kg | 20 | 36 | 48 | 70 | 71 | 95 | 120 |
| * EXTT version: device configured for outdoor installation ** HFO gas: low GWP refrigerant *** Possibility to extend to -20 / +55 **** Possibility to extend to -30 / +40 Non-contractual values / More information about air conditioning and cooling systems can be found on AFCE. |
||||||||
| RFC 08 AHI | RFC 14 AHI | RFC 19 AHI | ||
| Oil version available? | – | – | – | |
| EXTT* version available? | – | – | – | |
| HFO** refrigerant version available? | – | – | – | |
| Power supply | Type | Single-phase | Single-phase | Single-phase |
| V-Hz | 230-1-50/60 | 230-1-50/60 | 230-1-50/60 | |
| Cooling power (+10°C water outlet, +32°C ambient) |
W |
900 [1100***] | 1600 [1900***] | 2200 [2550***] |
| Power consumption | W | 1400 [1600***] | 1600 [2050***] | 1900 [2100***] |
| Refrigerant | Type | R134a | R134a | R134a |
| Input current maxi |
A | 6.3 [7.7***] | 7.6 [8.9***] | 7.8 [11.1***] |
| Line protection | A | nc | nc | nc |
| Electrical connection | mm² | nc | nc | nc |
| Waterproof index | IP | 44 | 44 | 44 |
| Nominal air flow | m3/h | 1000 | 1000 | 1000 |
| Available water flow mini / maxi |
l/mn | 3 / 18 | 5 / 18 | 6.5 / 18 |
| Available water pressure mini / maxi |
bar | 1 / 7.6 | 1 / 6.6 | 1 / 6 |
| Hydraulic connection | Type | F 1/2″ | F 1/2″ | F 1/2″ |
| Tank capacity | l | 10 | 10 | 10 |
| Operating temperature ambient mini / maxi |
°C | +15 / +45 | +15 / +45 | +15 / +45 |
| Regulation temperature range mini / maxi |
°C | +8 / +25 | +8 / +25 | +8 / +25 |
| Noise level at 1m | dB(A) | 56 | 56 | 56 |
| Dimensions |
H (mm) | 367 | 367 | 367 |
| L (mm) | 454 | 454 | 454 | |
| P (mm) | 725 | 725 | 725 | |
| Weights | kg | 52 | 54 | 55 |
| * EXTT version: device configured for outdoor installation ** HFO gas: low GWP refrigerant *** Values at 60 Hz Non-contractual values / More information about air conditioning and cooling systems can be found on AFCE. |
||||
Diagrams
RFC 02-07-12-20 water coolers diagrams
RFC 30 water coolers diagrams
RFC 08-14-19 water coolers diagrams
More information about RFC coolers
RFC coolers are part of EURODIFROID’s standard solutions, capable of quickly meeting “classic” cooling needs (water, oil, mixtures, etc.).
We only need a few steps to define the right product, with the appropriate options, and deliver it to you in just a few days:
- Defining the power required for your installation (our RFC range covers needs from 200 to 3000 W);
- Specifying the hydraulic configuration (type of fluid to be cooled, selection with/without pump, with/without tank, etc.);
- Setting the control parameters (flow/pressure safety features, remote operation, etc.);
- and finally, choosing the finishes (color, casing, protection, filtration, etc.).
A range of coolers designed to be highly modular, in order to respond quickly and efficiently to “classic” small and medium power needs: laser, welding, linear motors, aquarium, electro-erosion, electro-spindles…
Going further: our HFO refrigerant water / oil coolers (chillers)
The implementation of the future European F-gas standards will have/already has a major impact on all refrigeration equipment (new project, replacement of equipment, updating of fleets…).
At EURODIFROID, we already have water coolers (chillers), oil coolers (chillers) and industrial air conditioners compatible with these standards, and our teams are ready to support you in this transition.
And with us: turn a regulatory obligation into an opportunity to reduce your operating costs.
How?
Simply because the components needed to operate an HFO refrigeration circuit often natively incorporate more “intelligent” features, allowing for significant savings on the consumption costs of your water or oil chiller.
> Check out our COMPLETE HFO REPORT now and contact our experts to benefit from all their advice.
Discover other active coolers
Active coolers (cooling)
Designed & manufactured in France
and complementary products from Texas.
