// Aero cooling AERO 200 for ATOS //
5 AERO air/water heat exchangers for a leader in telecommunications and digital technology.
Heading to the Paris region (and our client ATOS, a specialist in telecommunications solutions) for an order of several AERO units.
Ensuring a precise and perfectly controlled temperature for telecommunications equipment (technical rooms, electrical or computer cabinets, climatic chambers, shelters…)?
Yes, we know how to do it, including for the biggest industrial players in the sector!
Leaving our factory, a fine series of AERO cooling units, including:
- 2x AERO 200 (here in image);
- 2x AERO 2×30;
- And 1x AERO 30.
But actually: what is an “AERO” cooling device?
An AERO is a cooler of the “air/water exchanger” type.
This type of device meets a simple technical need: to cool a tool or an industrial process (water, oil, emulsion…) using only ambient air.
No refrigerant circuit, therefore no gas, no compressor… just a direct exchange surface with the ambient air (if it is sufficiently cold and stable), combined with a hydraulic circulation circuit (pumps, tanks, valves…).
Therefore, once it has been verified that your conditions of use can correspond to this type of product, and by entrusting our teams with the task of sizing the right device, you will be able to find many advantages, especially economic ones!
Specifications of this AERO 200
- Power supply: 230V-1-50Hz
- Heat exchanger capacity: 18 kW at 40°C ambient temperature, operating temperature 60°C / 55°C with 35% glycol water
- Expected accuracy: +/-0.2°C
- Ambient temperature range: min +10°C – max 55°C
- Setpoint temperature range: min 35°C – max 45°C
- Flow rate: min 10 l/min – max 70 l/min
- Pressure: min 2.3 bar – max 4.5 bar
- One-piece chassis with 316L stainless steel tubing
- 1 variable-speed EC fan, 500 mm diameter, roof-mounted
- 1 atmospheric pressure tank with a capacity of 150 liters
- 1 centrifugal process circulation pump with a 316L stainless steel body
- 1 factory-set automatic bypass (pump protection)
- 1 bypass Manual for adjusting the water flow to your application
- 1 integrated and pre-wired SM7020 IFM 0.1-75L/MIN flow controller (pre-wired by us)
- Reinforced insulation for high-temperature operation
- Stainless steel hydraulic fittings
- Stainless steel bypass and control valves
- Other connections via rubber hoses
- 1 front-mounted electrical cabinet
- 1 front-mounted main disconnect switch
- 1 front-mounted PID electronic controller with proportional fan control
- 1 remote on/off switch
- 1 general fault switch via dry contact
- Complete factory cooling testing
Released on: May/5th/2026
We’re also being talked about on the web: EURODIFROID on Google News
